جديدة مخرطة المعادن ZMM C 11 T.6

neu
ca. 4 Monate ab Auftragse
Bulgarien
70260 €
1412.23 €
730 mm
2000 mm
365 mm
155 mm
500 mm
400 mm
160 M
12
16 - 800 1/min
152
0.039 - 9 mm/U
0.02 - 4.5 mm/U
76
0.5 - 90 mm
60 - 1/3 Gänge/"
0.125 - 22.5
240 - 1 1/3
390 mm
130 mm
90 mm
5 MK
225 mm
11 kW
Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry.
Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.
The clamping of the pipes with two universals and stands allows the processing of long pipes.
These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.

Drive via gearbox
Electrodynamic brake
3-axis digital display Fagor
Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round)
2 pcs. 3-jaw chuck Bison 3204 Dm. 500 mm on both sides of the spindle,
gripping range with outside jaws - 20 -235 mm
2 pcs. steady rests on supports Dm. 15 - 200 mm with rollers
Rapid traverses (4)
Longitudinal stop for one position
Taper turning device
Coolant device
Full length rear splash guard
Lead and feed spindle cover
Lathe chuck protection
Tool holder protection
Leveling bolts and plates
Tailstock with quick release
Mechanical movement of the tailstock with handwheel
Low voltage machine light
Operating instructions
Equipment according to +quot;CE+quot; regulations

Further models with spindle bore from 155 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.