آلة طحن المعادن Haas VF-2SS-EU

This 4-axis HAAS VF-2SS-EU vertical machining center was manufactured in 2018. It features a 762 mm X-axis travel, 406 mm Y-axis travel, and 508 mm Z-axis travel. Equipped with a BT-40 spindle achieving up to 12,000 rpm and a side-mount tool changer with a 30 + 1 tool capacity. Rapid traverse rates reach 35.6 m/min. Consider the opportunity to buy this HAAS VF-2SS-EU vertical machining center. Contact us for more information about this machine.
Table: 914 × 356 mm, 3 T-slots, 16 mm (5/8") width, 125 mm spacing
Spindle:Max torque: 120–125 Nm at low rpmRotation: CW/CCW programmable (M03/M04), orientation M19Bearing lubrication: air/oil
Max torque: 120–125 Nm at low rpm
Rotation: CW/CCW programmable (M03/M04), orientation M19
Bearing lubrication: air/oil
Tool changer:Side-mount SMTC super-speed, 30+1 stationsTool-to-tool: ~1.6 s; chip-to-chip: ~2.2 sMax tool: 5 kg; Ø 76 mm (adjacent full) / Ø 127 mm (adjacent empty); length 279 mm
Side-mount SMTC super-speed, 30+1 stations
Tool-to-tool: ~1.6 s; chip-to-chip: ~2.2 s
Max tool: 5 kg; Ø 76 mm (adjacent full) / Ø 127 mm (adjacent empty); length 279 mm
Feedrates and performance:Rapids (X/Y/Z): 35.6 m/minMax cutting feed: 21 m/minHigh acceleration (Super Speed) and high-speed machining activated
Rapids (X/Y/Z): 35.6 m/min
Max cutting feed: 21 m/min
High acceleration (Super Speed) and high-speed machining activated
Probing (WIPS, Renishaw), fully integrated with Haas VPS:Work probe: auto zeroing, contour measurement, hole centers, angled faces, position verificationTool probe: length/diameter measurement, tool break detection
Work probe: auto zeroing, contour measurement, hole centers, angled faces, position verification
Tool probe: length/diameter measurement, tool break detection
Coolant and pneumatics:Flood coolant with 200 L tank; standard nozzle orientation + spindle ringMist lubrication for drilling/tappingCompressed air: 6.5–7 bar (95–100 psi) for tool change and purges
Flood coolant with 200 L tank; standard nozzle orientation + spindle ring
Mist lubrication for drilling/tapping
Compressed air: 6.5–7 bar (95–100 psi) for tool change and purges
Control and connectivity (Haas NGC, 15" color screen):Program memory: 32 GBUI: menus, file browser, offsets, VPS integratedConnectivity: Wi‑Fi, Ethernet, front USBProgramming: macros (# variables, IF/THEN, WHILE, calculations), VPS editor, media display
Program memory: 32 GB
UI: menus, file browser, offsets, VPS integrated
Connectivity: Wi‑Fi, Ethernet, front USB
Programming: macros (# variables, IF/THEN, WHILE, calculations), VPS editor, media display
Activated options/software:Macros, rotation & scaling, rigid tapping, M19 spindle orientationHigh-speed machining, VPS editor, media display4th-axis capability (control), 32 GB memory, Wi‑Fi connectivityTool and work offsets, 12,000 rpm spindle, WIPS (workpiece + tool probe)
Macros, rotation & scaling, rigid tapping, M19 spindle orientation
High-speed machining, VPS editor, media display
4th-axis capability (control), 32 GB memory, Wi‑Fi connectivity
Tool and work offsets, 12,000 rpm spindle, WIPS (workpiece + tool probe)
application type: Milling
Location: Spain
machine type: Vertical Machining Centre
Table Load: 680 kg
Number of Axes: 4
Max. Tool Weight: 5 kg
Spindle Power: 22.4 kW
Taper Size: BT 40