ماكينة تشكيل البلاستيك ROLBATCH RBSDMS-IZS-678

This ROLBATCH RBSDMS-IZS-678 was made in 2016. It is equipped with a Mill PLC control unit. The machine has a maximum film thickness of 0.3-1 mm.
Location: DE
brand: ROLBATCH
Throughput capacity: up to 450 kg / hour
Raw material: pp or ps
Maximum film thickness: 0. 3-1 mm / maximum film width: up to 1600 mm
Installed motor power: 278 kw / heating power: 201 kw / required power supply: three-phase current, 50 hz / compressed air consumption: 0. 2 m³/min / water consumption: 30 m³/h
The line consists of: Single-screw extruder 75 mm x 2 pieces Single-screw extruder 120 mm x 1 piece Screen changer x 3 pieces Extrusion head for 5-layer film extrusion (C/B/A/B/C) Calender x 3 pieces Take-off winding station x 3 pieces
Machine Benefits
Qualitative Machine Benefits
Machine can be seen and tested
The machine is like new
fully functional
The machines typically consume between 60 and 80% of the installed power because the highest energy consumption occurs during startup and when the heating elements are warming up. After that
only reheating to the required temperature is needed. The machine is equipped with frequency inverters for the motors
so it does not continuously use the full installed power but significantly less
Technical Machine Benefits
3-5 layer flat film line used 3-5 layer pp / ps cast film line
Extrusion line for thick calendered polypropylene and polystyrene films
suitable for thermoforming
Extra Information