جديد جرافة ذات عجلات SDLG 933F

Wheel Loader – Technical Specifications
Overall Dimension
L×W×H: 7320×2520×3170 mm

Wheel base: 2850 mm

Min. ground clearance: 370 mm

Max. dumping height: 2930 mm

Lifting height: 3790 mm

Dumping distance: 1140 mm

Dumping angle: -45°

Bucket rollback at ground level: 45°

Wheel tread: -

Steering angle: 37°

Horizontal crossing radius: 6065 mm

Min. turning radius: 5250 mm

Overall Parameters
Bucket capacity: 2.1 m³

Rated load: 3500 kg

Operating weight: 10940 kg

Max. tractive force: 100 kN

Max. breakout force: ≥96 kN

Tipping load: ≥70 kN

Engine
Model: WP6G140E22

Type: Inline, water-cooled, four-stroke, direct injection

Rated power: 105 kW

Rated speed: 2200 r/min

Engine displacement: 6750 ml

Cylinder bore/stroke: 105/130 mm

Max. torque/speed: 560 N·m / 1300–1500 r/min

Emission Standard
Standard: GB 20891-2007

Min. fuel-consume ratio: 215 g/kW·h

Transmission System
Torque converter: Single-stage three-element hydraulic torque converter

Transmission type: Fixed shaft power shift – high/low speed

Gears: Forward 4 / Reverse 2

Speed (forward gear I): 0–8 km/h

Speed (forward gear II): 0–14 km/h

Speed (forward gear III): 0–27 km/h

Speed (forward gear IV): 0–41 km/h

Speed (reverse gear I): 0–10 km/h

Speed (reverse gear II): 0–32 km/h

Hydraulic System of Working Device
Type: Hydraulic pilot control

Total time: ≤9.2 s

Brake System
Service brake type: Air over oil caliper disc brake

Parking brake type: Manual control internal expanding shoe brake

Steering System
Type: Load sensing full hydraulic articulated steering

System pressure: 14 MPa

Fill Capacity
Fuel: 200 L

Hydraulic oil: 128 L

Engine oil: 18 L

Transmission: 45 L

Drive axle: 28+28 L